ISSN e: 2007-4026 / ISSN print:2007-3925

       

 
 
 
 
 
 
 
 

    Volume Vol. 13, issue 2, Issue 2 July - December 2021   Creative Commons License

      
 

     Vol. 13, issue 2 July - December 2021  

   Creative Commons License

 
  
 
 
  • Analysis of the NASA-POWER system for estimating reference evapotranspiration in the Comarca Lagunera, Mexico

  • Evaluación del sistema NASA-POWER para estimar la evapotranspiración de referencia en la Región Lagunera, México

Sergio Iván Jiménez-Jiménez; Waldo Ojeda-Bustamante; Marco Antonio Inzunza-Ibarra; Mariana de Jesús Marcial-Pablo

datos de reanálisis, datos asimilados, FAO-56, Penman-Monteith, Hargreaves y Samani

10.5154/r.inagbi.2021.03.050

Received: 2021-03-18
Accepted: 2021-07-26
Available online: 2021-08-29
Pages:201-226

Introducción: El método FAO-56 Penman-Monteith (PM) es uno de los más usados y robustos para estimar la evapotranspiración de referencia (ETo); sin embargo, requiere datos meteorológicos que no siempre están disponibles, por lo que una alternativa es el uso de datos de reanálisis.
Objetivo: Estimar el error que pueden generar los datos del sistema NASA-POWER (NP) en la ETo de la Región Lagunera, México.
Metodología: Se estimó la ETo diaria y promedio decenal de cinco formas diferentes. En cada caso, se empleó un método para estimar la ETo (FAO-56 PM o Hargreaves y Samani 30 [HS]) y una fuente de datos meteorológicos diferente (medidos, datos de NP o combinación de ambos).
Resultados: Los datos de NP se pueden emplear para proporcionar variables de temperatura, radiación solar y humedad relativa, pero no de velocidad de viento. Los datos de NP sobrestiman la ETo observada, para periodos diarios y decenales se encontró un RMSE de 1.15 y 0.89 mm∙d-1 35 , respectivamente.
Limitaciones del estudio: No se pudo hacer un análisis del error por cuadrícula porque el número de estaciones es limitado.}Originalidad: El uso de datos de reanálisis para estimar la ETo no se ha analizado localmente.
Conclusión: Cuando no se cuente con datos medidos se pueden emplear los datos de NP y la ecuación de HS. Cuando se utilice el método de FAO-56 PM y los datos de NP, se debe tener la velocidad del viento in situ.

Introducción: El método FAO-56 Penman-Monteith (PM) es uno de los más usados y robustos para estimar la evapotranspiración de referencia (ETo); sin embargo, requiere datos meteorológicos que no siempre están disponibles, por lo que una alternativa es el uso de datos de reanálisis.
Objetivo: Estimar el error que pueden generar los datos del sistema NASA-POWER (NP) en la ETo de la Región Lagunera, México.
Metodología: Se estimó la ETo diaria y promedio decenal de cinco formas diferentes. En cada caso, se empleó un método para estimar la ETo (FAO-56 PM o Hargreaves y Samani 30 [HS]) y una fuente de datos meteorológicos diferente (medidos, datos de NP o combinación de ambos).
Resultados: Los datos de NP se pueden emplear para proporcionar variables de temperatura, radiación solar y humedad relativa, pero no de velocidad de viento. Los datos de NP sobrestiman la ETo observada, para periodos diarios y decenales se encontró un RMSE de 1.15 y 0.89 mm∙d-1 35 , respectivamente.
Limitaciones del estudio: No se pudo hacer un análisis del error por cuadrícula porque el número de estaciones es limitado.}Originalidad: El uso de datos de reanálisis para estimar la ETo no se ha analizado localmente.
Conclusión: Cuando no se cuente con datos medidos se pueden emplear los datos de NP y la ecuación de HS. Cuando se utilice el método de FAO-56 PM y los datos de NP, se debe tener la velocidad del viento in situ.

 
 
  • Spatial distribution of soil organic carbon by digital mapping: the case of the Medio Aguanaval river sub-basin

  • Distribución espacial de carbono orgánico del suelo mediante mapeo digital: caso subcuenca río Medio Aguanaval

Georgina Pérez-Rodríguez; Armando López-Santos; Miguel Agustín Velásquez-Valle; José Villanueva-Díaz; Jorge Luis García-Rodríguez

SOC estimation, interpolation, SOC reserves, Geographic Information Systems

10.5154/r.inagbi.2021.03.055

Received: 2021-03-19
Accepted: 2021-08-20
Available online: 2021-12-07
Pages:227-245

Introduction: Carbon is found mainly in geological reservoirs, oceans, atmosphere and land. Soil organic carbon (SOC) is determined by the quantity and vertical distribution of vegetation, intrinsic soil properties and climate, but variability is influenced by anthropogenic interference. SOC stocks are not static; modeling their spatial, vertical and horizontal distribution involves the creation of baseline estimates to quantify these stocks.
Objective: To estimate the magnitude of SOC stocks in the Medio Aguanaval River sub-basin (ScRMA) and to analyze the sensitivity of four interpolation methods to minimize the error of digital mapping for the ScRMA.
Methodology: The study consisted of five stages: 1) search, download and analysis of soil data, 2) data processing, 3) selection of verification sites, 4) laboratory analysis and 5) processing of data from verification sites.
Results: SOC values ranged from 9 to 133 t·ha-1, with a mean of 36.31 t·ha-1 and standard deviation of 23.83 t·ha-1. The ordinary exponential Kriging interpolator was the best representation for SOC of the ScRMA based onstatistics. The results of the analysis of the verification sites yielded a mean SOC of 24.4 t·ha-1.
Limitations of the study: Soil profile density for the region and the lack of information on bulk density.
Originality: The baseline distribution of SOC at the sub-basin level was used to analyze its dynamics.
Conclusions: The highest concentration of SOC (61 to 129 t·ha-1) was found in the municipalities of Cuencamé and Santa Clara, while the lowest records (10 to 30 t·ha-1) were located in the municipalities of Torreón and Viesca.

Introduction: Carbon is found mainly in geological reservoirs, oceans, atmosphere and land. Soil organic carbon (SOC) is determined by the quantity and vertical distribution of vegetation, intrinsic soil properties and climate, but variability is influenced by anthropogenic interference. SOC stocks are not static; modeling their spatial, vertical and horizontal distribution involves the creation of baseline estimates to quantify these stocks.
Objective: To estimate the magnitude of SOC stocks in the Medio Aguanaval River sub-basin (ScRMA) and to analyze the sensitivity of four interpolation methods to minimize the error of digital mapping for the ScRMA.
Methodology: The study consisted of five stages: 1) search, download and analysis of soil data, 2) data processing, 3) selection of verification sites, 4) laboratory analysis and 5) processing of data from verification sites.
Results: SOC values ranged from 9 to 133 t·ha-1, with a mean of 36.31 t·ha-1 and standard deviation of 23.83 t·ha-1. The ordinary exponential Kriging interpolator was the best representation for SOC of the ScRMA based onstatistics. The results of the analysis of the verification sites yielded a mean SOC of 24.4 t·ha-1.
Limitations of the study: Soil profile density for the region and the lack of information on bulk density.
Originality: The baseline distribution of SOC at the sub-basin level was used to analyze its dynamics.
Conclusions: The highest concentration of SOC (61 to 129 t·ha-1) was found in the municipalities of Cuencamé and Santa Clara, while the lowest records (10 to 30 t·ha-1) were located in the municipalities of Torreón and Viesca.

 
 
  • Forage yield and quality of three rainfed crops in four-row and six-row seedbeds using different fertilization methods

  • Rendimiento y calidad de forraje de tres cultivos de secano en camas a cuatro y seis hileras con diferentes métodos de fertilización

Esteban Salvador Osuna-Ceja; José Pimentel-López; Miguel Ángel Martínez-Gamiño; Benjamín Figueroa-Sandoval

biomimetic integral subsoiler, Aqueel, pile tillage, zeolite, dry matter distribution

10.5154/r.inagbi.2020.10.070

Received: 2020-10-26
Accepted: 2021-10-15
Available online: 2021-12-17
Pages:247-259

Introduction: In the temperate-semiarid region of Aguascalientes, Mexico, most of the rural population depends on rainfed agriculture related to the family milk production system.
Objective: To evaluate the effect of different fertilization practices on forage yield and quality of three rainfed crops in four- and six-row seedbeds.
Methodology: Five fertilization treatments were evaluated: T1) control (no fertilization), T2) chemical fertilization (40-40-00 kg·ha-1 of N-P-K), T3) mixture (28-40-00 kg·ha-1 and 26 kg of zeolite), T4) organic fertilizer (5 t·ha-1 of bovine manure) and T5) mycorrhiza (inoculation with 350 g·ha-1 of mycorrhizal substrate). Maize and sunflowers were planted in four rows, and sorghum in six rows. A randomized complete block design with four replicates was used.
Results: Dry matter yield in relation to the control, in T2, T3 and T4 was 100, 84 and 26 % for maize, 123, 177 and 67 % for sunflowers, and 52, 49 and 91 % for sorghum, respectively. T5 was higher compared to T1, but without statistical difference. Forage quality of the three crops showed no increase, except for crude protein in T2 and T3. Limitations of the study: Results correspond to a single cycle (spring-summer). Originality: Good agronomic practices for forage production were established
Conclusions: Agronomic practices (minimum tillage, in situ rainwater harvesting, sowing methods and fertilization) generate a positive effect on yield and forage quality in rainfed crops.

Introduction: In the temperate-semiarid region of Aguascalientes, Mexico, most of the rural population depends on rainfed agriculture related to the family milk production system.
Objective: To evaluate the effect of different fertilization practices on forage yield and quality of three rainfed crops in four- and six-row seedbeds.
Methodology: Five fertilization treatments were evaluated: T1) control (no fertilization), T2) chemical fertilization (40-40-00 kg·ha-1 of N-P-K), T3) mixture (28-40-00 kg·ha-1 and 26 kg of zeolite), T4) organic fertilizer (5 t·ha-1 of bovine manure) and T5) mycorrhiza (inoculation with 350 g·ha-1 of mycorrhizal substrate). Maize and sunflowers were planted in four rows, and sorghum in six rows. A randomized complete block design with four replicates was used.
Results: Dry matter yield in relation to the control, in T2, T3 and T4 was 100, 84 and 26 % for maize, 123, 177 and 67 % for sunflowers, and 52, 49 and 91 % for sorghum, respectively. T5 was higher compared to T1, but without statistical difference. Forage quality of the three crops showed no increase, except for crude protein in T2 and T3. Limitations of the study: Results correspond to a single cycle (spring-summer). Originality: Good agronomic practices for forage production were established
Conclusions: Agronomic practices (minimum tillage, in situ rainwater harvesting, sowing methods and fertilization) generate a positive effect on yield and forage quality in rainfed crops.

 
 
  • Agricultural tractor slippage measurement system using encoders

  • Sistema de medición de patinaje de tractores agrícolas mediante codificadores

Gerónimo García-Rivera; Martín Cadena-Zapata; Juan Antonio López-López; Gilbert Fresh López-López; Santos Gabriel Campo-Magaña; Alejandro Zermeño-González; Hugo Gutiérrez-Flores

traction, tillage, automation, soil moisture

10.5154/r.inagbi.2021.07.070

Received: 2021-07-12
Accepted: 2021-10-15
Available online: 2021-12-17
Pages:261-271

Introduction: Slippage is usually measured with a standard manual method, however, if it is required slippage information inline in extensive areas of cropland, mechanical and electronic equipment have to be developed.
Objective: To design, assemble and evaluate (in laboratory and under field conditions) an encoder-based slippage measurement system.
Methodology: The system was integrated and tested in the laboratory, where equations were generated to calculate the slippage. The system was installed in an agricultural tractor and its performance was evaluated on an asphalt track and working with tillage implements on various soil conditions.
Results: The values obtained with the manual method and the encoder-based method showed very small differences. The results of field evaluation of the system are in congruence with the type of implement and with the moisture content in the soil. This indicates that the measurement of distances by the wheel turns and the calculation of the percentage of slippage are correct.
Study limitations: The system was tested in short runs (up to 100 m). Still to be tested in at least 1 ha.
Originality: Automated slippage measurement in extended crop areas.
Conclusions: The slippage measurement system based on encoders is reliable for automatically measuring the slippage of agricultural tractor in different field conditions,

Introduction: Slippage is usually measured with a standard manual method, however, if it is required slippage information inline in extensive areas of cropland, mechanical and electronic equipment have to be developed.
Objective: To design, assemble and evaluate (in laboratory and under field conditions) an encoder-based slippage measurement system.
Methodology: The system was integrated and tested in the laboratory, where equations were generated to calculate the slippage. The system was installed in an agricultural tractor and its performance was evaluated on an asphalt track and working with tillage implements on various soil conditions.
Results: The values obtained with the manual method and the encoder-based method showed very small differences. The results of field evaluation of the system are in congruence with the type of implement and with the moisture content in the soil. This indicates that the measurement of distances by the wheel turns and the calculation of the percentage of slippage are correct.
Study limitations: The system was tested in short runs (up to 100 m). Still to be tested in at least 1 ha.
Originality: Automated slippage measurement in extended crop areas.
Conclusions: The slippage measurement system based on encoders is reliable for automatically measuring the slippage of agricultural tractor in different field conditions,